Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: Tyre pressures car manufacturer vs tyre maker ?

  1. #1
    Moderator
    Join Date
    Jul 2013
    Posts
    8,000

    Tyre pressures car manufacturer vs tyre maker ?

    Question what pressure do you go by do you use the cars official tyre pressures from the door jam or do you use the tyre manufacturers recommendations

    Reason I ask is bmw recommend to use 2.2 bar front 2.6 bar rear on the 18" setup

    But having looked at vredestein and choosing my car and tyre they recommend 3.0 bar front 2.8 bar rear

    Odd as rear pressures are usually higher on staggered wheel bmw setups

    http://m.vredestein.com/car/search/model/result?make=bmw&model=5er-reihe%20(e39)&type=525%20i&version=31712

  2. #2
    BMWHaus Guru
    Join Date
    Jul 2013
    Posts
    3,620

    RE: Tyre pressures car manufacturer vs tyre maker ?

    Quote Originally Posted by Gar
    Question what pressure do you go by do you use the cars official tyre pressures from the door jam or do you use the tyre manufacturers recommendations

    Reason I ask is bmw recommend to use 2.2 bar front 2.6 bar rear on the 18" setup

    But having looked at vredestein and choosing my car and tyre they recommend 3.0 bar front 2.8 bar rear

    Odd as rear pressures are usually higher on staggered wheel bmw setups

    http://m.vredestein.com/car/search/model/result?make=bmw&model=5er-reihe%20(e39)&type=525%20i&version=31712
    32 psi in everything and crack on.... :wink::tounge:

  3. #3
    BMWHaus Guru
    Join Date
    Jul 2013
    Posts
    1,787

    RE: Tyre pressures car manufacturer vs tyre maker ?

    Weird, it's saying that mine should be 3.2 bar front and 3.1 bar rear.

    That's 46 PSI front and 45 PSI rear...isn't that very very high?

  4. #4
    Moderator
    Join Date
    Jul 2013
    Posts
    8,000

    RE: Tyre pressures car manufacturer vs tyre maker ?

    @venom too low/soft for me especially in the rear

    @donal seems excessively high doesn't it ?

  5. #5

    Re: RE: Tyre pressures car manufacturer vs tyre maker ?

    Quote Originally Posted by Don B
    Weird, it's saying that mine should be 3.2 bar front and 3.1 bar rear.

    That's 46 PSI front and 45 PSI rear...isn't that very very high?
    Man I wouldn't fancy that at all, seems crazy high. I personally don't go over 36 and don't find that I'm missing anything

    Sent from my HTC One using Tapatalk 2

  6. #6
    Moderator
    Join Date
    Jul 2013
    Posts
    8,000

    RE: Tyre pressures car manufacturer vs tyre maker ?

    Normally pressures that high would only be recommend on the door jam label if the car was fully loaded ie. 4 adults and full boot

    36 is about what I run on the rear 2.5/2.6 bar

  7. #7
    BMWHaus Guru
    Join Date
    Jul 2013
    Location
    Dublin, Ireland
    Posts
    3,647

    RE: Tyre pressures car manufacturer vs tyre maker ?

    Usually 30 all around. Haven't a clue what to use for the csl's

  8. #8

    Tyre pressures car manufacturer vs tyre maker ?

    I've 19inch Spiders, using 32 up front & 38 on staggered rear


    Sent from my iPhone using Tapatalk

  9. #9
    Moderator
    Join Date
    Jul 2013
    Posts
    8,000

    RE: Tyre pressures car manufacturer vs tyre maker ?

    Sounds low shane check the label pressures inside the driver door should be listed for the 19" wheel be the same or similar as csl's

  10. #10

    RE: Tyre pressures car manufacturer vs tyre maker ?

    I was getting my wheels aligned today and the guy told me he always puts 36 psi in the front and 30psi in the rear for bmws

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •